| |
| |
|
|
 |
| |
|
 |
time to party
simply erected marquee with a multitude of uses ...it is ideally
suited for use at home for Garden Parties, Birthday Parties,
Weddings, Anniversaries, Barbecues or a Charity Function.
It is equally suitable at an Office Party for a new promotion,
the Village Fete, the Local School or a Cake Stall in the market. |
|
 |
|
|
|
Features and details
Features
• Free standing, no pegging necessary. • Easy to erect. • No tools necessary. • Can be used on hard standing or soft.
• Easy to transport, will fit into the back of car/hatchback. • Can be used with or without wall panels.
• Doorways can be created wherever required. • All side panels are individually fitted by a simple lacing method.
Fabric
• 480gsm PVC coated polyester. • Fire retardant to M2 and BS 7837. • Lacquer finish for easy care and good looks.
• Ultra violet stabilised to prevent the material stretching or fading in hot weather and cracking in freezing conditions.
• Anti fungicide treated to prevent fungus spores forming if the tent is left folded when wet for any length of time.
• Champagne coloured PVC and bound in green as standard.
Frame
• 32mm x 1.5mm gold passivate electro plated steel tubular frame. • Welded and reinforced angles.
• Only two different angles used (3 way and 4 way). • All roof poles same length and interchangeable. • All legs same length.
• No springs or clips, nuts or bolts.
Options
• Crystal window panels. • Plain fabric panels. • Zipped door fire exit panels.
Extras
• Groundrails for holding down wall panels on hard standing. • Linings, Walkways and Jointers. |
|
 |
| Stage one Lay out the roof sections of poles approximately where you require the finished marquee to stand. Slot all the roof sections together, then lay out the legs ready to be slotted into the roof sections. Stage two Roll out the roof over the frame. Stage three Make sure the corners of the cover match the corners of the frame and slot in the legs. Once one side is completed move to the other side and repeat. Stage four When the frame and cover are lifted to the full height the Marquee can then be repositioned to its final location. Then simply hook the canvas to the feet then add the windows and doors as you require them. |
|
 |
< Dutch lacing the window panels in place, it couldn’t be easier. |
 |
< The frame simply slots together, no tools required. |
 |
< The cover simply hooks to the foot of the frame. The foot can be pegged to the ground. |
|
 |
 |
|
|
|
|
|
 |
|
 |
| |
|
|
